Our waterproofing systems provide

A number of high-tech coating systems are available which generally involve applying series of different coats and are thus normally applied by professional applicators. Examples of such coatings include the Versa-Deck range of reinforced fibreglass and acrylic resin coatings and the Metacrylics range of acrylic and polyester fabric coatings. Such coatings are again available in different colours. However these coatings can only be applied over a continuous solid surface such as marine grade plywood, so if you don't already have a deck with a plywood surface, then you have the extra expense of installing this surface as well. marine deck wood plastic flooring
In this case, lengths of a special interlocking aluminum decking profile are installed over the top of the deck. Normally this type of decking would replace the original wood planks on your deck, so requires some extra cost and work to demolish part of the existing structure. Channels on the underside of the profile drain the water away to the edge of the deck. Such products are available from e.g. Lock Dry. Various colour options are available. One point to note with aluminum decking is that it can get very hot underfoot in mid-summer and can be somewhat noisier when walked on than e.g. you wood or vinyl. waterproof deck surfaces
Our waterproofing systems provide very attractive and superior protection for all types of above grade decks and waterproof coverings, These include Wood Based Decks or Concrete Decks, deck restoration systems, recoating systems and under-tile waterproofing waterproofing systems. They are used in residential housing, hotels, apartment buildings, parking garages, RV, schools, houseboats, around pools or in office buildings. These waterproofing products are proven to perform and last in the most extreme climates.
For waterproofing decks we recommend the excellent Sonoguard Deck waterproofing system from BASF. Sonoguard features outstanding performance and easy-to-use application. It is suitable for a wide variety of applications. Sonoguard is ICBO rated and Miami-Dade approved. We stock the topcoat for Sonoguard is available pre-tinted in tan and light gray. We also stock Sonoguard Tintable topcoat that can tinted to one of 40 tint colors and 470 custom colors.
Got Decks? If so, SCD has got the right deck coating to meet your needs. We are certified installers in Southern California of some of the best deck coating systems available, including the Mer-Ko ( a.k.a Mer-Kote systems), which is important to you, the consumer, because different applications will require the installation of different coatings. Without having a contractor that has a wide array of coatings to choose from, you never know if you're getting the right material for your project, or simply the only material that the contractor may be approved to install, or knows how to install for that matter. We have an example of the wrong way to apply a deck caoting at the bottom of this page.
We do waterproofing and coating work throughout the entire Southern California area including construction, below grade, roof repair, balcony coating, epoxy coating work, pool decks, balcony, walkway, vehicular, and deck waterproofing / coatings. Maintenance, repairs, and new installations in Los Angeles, Orange, Riverside and Ventura counties are some of our specialties. wood used outside decks
TOP WILL NOT COMPLETELY WATERPROOF BALCONIES OR WOOD SURFACES, but it will protect the surfaces from surface water or damage). Its easy to apply and provides a beautiful, long-lasting low-skid surface. Rhino Top is recommended for cool deck restoration, sport surfaces, tennis courts, athletic courts, around pools, for slippery walkways and where cool-deck might be used. It is applied in just ONE DAY using standard painters roll-on equipment.
Weather Deck is a multilayered latex mastic roofing system which is trowel applied to a "floating" base sheet. This system provides a slip resistant, waterproof walking surface that is isolated from substrate cracks. Waterproof flashing for drains, vertical surfaces, thresholds, as well as stress relief for thermal expansion are incorporated into the system. The thickness is approximately 3/16"-1/4" (4.7 mm-6.35 mm) and presents few elevation problems at doors, landings, steps, etc. wpc fence panels installer uk